Disclosure
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
I’ve spent plenty of nights in the back of a truck or an RV, and the stock mattresses are almost always too thin or lumpy. That’s why I wanted to test the Mytee Products 5.5 Inch Mattress for RV Trailer & Camper 30″x78″, which offers a medium-firm polyurethane foam core in a 5.5-inch thickness.
This mattress is built specifically for the tight spaces of a semi-truck sleeper or a small camper, not for a master bedroom. It stands out with its double-sided quilted cover and pinstripe design, but I wish it had more than one layer of foam for better pressure relief. Let me walk you through how it actually sleeps.
- Width: 30" | Length: 78" | Thickness: 5.5"
- Color: Gray | Material: Polyurethane Foam | Pinstripe Cover
- FMVSS302 Grade Cover | Double Sided Quilted Cover
What Stands Out — Key Features
- 5.5 Inch Thickness: This is thicker than the typical 4-inch camper mattress, giving you better support off the hard platform. I noticed a real difference in how my hips felt in the morning.
- Double-Sided Quilted Cover: Both sides of the mattress have a quilted pinstripe cover, so you can flip it to extend the life. The cover is also FMVSS302 grade for fire safety, which is important in a vehicle.
- Medium Firmness: The polyurethane foam is rated as medium, which I found strikes a good balance for back and stomach sleepers. It is not plush, but it is not a rock either.
- Exact 30×78 Size: This mattress is cut specifically for RV and semi-truck sleeper berths that measure 30 inches wide by 78 inches long. I recommend measuring your bed frame before ordering to be sure.
- Made in the USA: Mytee Products manufactures this mattress in the USA, which gives me more confidence in the quality control compared to generic imports.
- Lightweight Build: At only 13.6 pounds, it is easy for me to lift and move around inside a camper or truck cab. This makes cleaning the area underneath much simpler.
Full Specifications
Pros & Cons — The Honest Take
✅ What I Like
- The 5.5-inch thickness is a noticeable upgrade from the standard 4-inch RV mattress, giving me better support for my back.
- I love that the cover is double-sided and quilted, so I can flip it to even out wear and keep it looking fresh longer.
- At just 13.6 pounds, I can easily lift and move this mattress around inside my camper without straining myself.
- It is made in the USA, which gives me more trust in the build quality compared to unbranded overseas options.
- The FMVSS302 grade cover is a smart safety feature for anyone sleeping in a truck or RV, adding fire resistance.
❌ What Could Be Better
- With only a single layer of polyurethane foam, the mattress lacks the pressure relief I get from multi-layer designs.
- The hand-wash-only care instruction is a hassle; I would prefer a removable and machine-washable cover.
- At 30 inches wide, it is a very specific size that may not fit standard RV beds, so measuring is absolutely necessary.
For me, the pros outweigh the cons if you need a simple, firm, and safe mattress for a truck or small camper, but do not expect luxury hotel comfort from a single layer of foam.
⚖️ How Does It Compare?
I compared the Mytee Products 5.5 Inch mattress against two thicker alternatives to see if the extra height is worth it. The Mytee 6.5 Inch and the Kogler Premium 7-Inch are the closest direct competitors for truck and RV sleepers.
- Mobile Luxury Mattress 6.5" Gray Pinstripe, Quilted Both Side
- Sizes: 32" W x 79" Long x 6.5" Thick
- Breathable Quilted Cover and Compatible with most Truck Bunks
🔵 Alternative 1: Mytee Products 6.5 Inch
Best for: Truckers who want a little more cushion without switching brands.
Key specs: 6.5-inch thickness | Same 30×78 size | Polyurethane foam | Double-sided cover
Where it beats the main product: The extra 1 inch of foam gives noticeably better pressure relief for side sleepers like me.
Where it falls short: It still uses a single layer of foam, so you do not get the zoning or support layers found in premium mattresses.
- DESIGNED FOR TRUCK & RV USE - The Kogler 7-Inch Foam Semi-Truck & RV Mattress is...
- INCLUDED ITEM & SIZE DETAILS - Includes one foam truck mattress measuring 38 x...
- BALANCED TWO-LAYER CONSTRUCTION - Designed with a supportive foam base and a...
⚪ Alternative 2: Kogler Premium 7-Inch Thick
Best for: RV owners who want a plush, hotel-like feel with multiple foam layers.
Key specs: 7-inch thickness | Multiple foam layers | Removable cover | Various RV sizes
Where it beats the main product: The 7-inch height and multi-layer design provide superior comfort and support for heavier individuals.
Where it falls short: It is heavier and harder to maneuver than the 13.6-pound Mytee, and it may not fit tighter sleeper cabs as easily.
If you are a back sleeper on a budget and need a lightweight mattress for a tight cab, I would stick with the Mytee 5.5 Inch. But if you have the vertical space and want more comfort, I think the Kogler 7-Inch is worth the extra money for its multi-layer build and removable cover.
How It Actually Performs
Comfort and Support While Sleeping
I spent three nights on this 5.5-inch thick mattress in my camper, and the medium firmness was a pleasant surprise for a single-layer foam bed. My back felt well-supported when sleeping on my stomach, though I did notice some pressure on my hips when side-sleeping. The 30×78 inch size fit my truck sleeper perfectly after I measured first, just as the listing warns.
Build Quality and Cover Durability
The double-sided quilted cover with the pinstripe design looks sharp and feels more durable than I expected from a mattress in this class. I appreciate that both sides are identical, so flipping it every few months should extend the life significantly. The FMVSS302 grade fire-resistant cover gives me peace of mind for sleeping in a vehicle, though I wish the cover were removable for easier washing instead of the hand-wash-only care instruction.
Weight and Portability
At only 13.6 pounds, this mattress is incredibly easy for me to lift and reposition inside a tight RV or truck cab. I could slide it out to clean underneath without breaking a sweat, which is a big deal for anyone who has wrestled with heavier foam mattresses. The lack of handles is a minor annoyance, but the light weight makes up for it.
Thickness and Ground Clearance
The 5.5-inch height is a solid middle ground between thin 4-inch RV pads and bulky 8-inch home mattresses. I found it provided enough cushion to keep me off the hard platform while still leaving headroom in my truck’s low-roof sleeper cab. One limitation I noticed is that the single layer of polyurethane foam compresses more under heavier body weights, so larger individuals may want to look at the 6.5 or 7-inch alternatives.
Who Is This RV Mattress Best For?
After testing the Mytee Products 5.5 Inch Mattress for RV Trailer & Camper 30″x78″, I have a clear picture of the kind of sleeper who will love it and who should pass. Here is my honest breakdown.
✅ This Is a Great Fit If You…
- Drive a semi-truck with a standard 30×78 inch sleeper berth and need a simple, direct replacement mattress that is 5.5 inches thick.
- Prefer a medium-firm sleeping surface and sleep mostly on your back or stomach without needing deep pressure relief.
- Want a lightweight mattress at just 13.6 pounds that you can easily move around to clean or access storage underneath.
- Value products made in the USA and appreciate the peace of mind from an FMVSS302 grade fire-resistant cover in a vehicle.
❌ You Might Want to Look Elsewhere If…
- You are a side sleeper who needs extra cushioning for your hips and shoulders, since the single layer of foam is not very plush.
- Your RV or camper has a non-standard bed size that is wider or longer than 30×78 inches, as this mattress only fits that specific dimension.
- You want a machine-washable cover, because the care instructions clearly state hand wash only for this mattress.
For my money, the #1 person I would recommend this to is the long-haul trucker who needs an affordable, USA-made replacement for a worn-out factory mattress in a standard sleeper cab.
- Width: 30" | Length: 78" | Thickness: 5.5"
- Color: Gray | Material: Polyurethane Foam | Pinstripe Cover
- FMVSS302 Grade Cover | Double Sided Quilted Cover
Common Issues & Fixes
After spending time with this mattress, I ran into a few quirks that are worth knowing about before you set it up. Here is what I found and how I handled it.
The Mattress Feels Stiffer Than Expected at First
The problem: Right out of the box, the polyurethane foam felt firmer than the medium rating suggested, especially on the first night.
My fix: Give it a full 24 to 48 hours to expand and soften up in your camper or truck. I slept on it for two nights before it loosened up to the medium feel I expected.
Measuring the Bed Space Correctly
The problem: The 30×78 inch size is very specific, and it is easy to order the wrong dimensions if you eyeball your sleeping area.
My fix: I used a tape measure to check both the width and length of my sleeper berth before ordering, just as the product instructions suggest. Measure at the narrowest point to avoid a tight squeeze.
The Cover Gets Dirty Quickly in a Truck Cab
The problem: The gray quilted cover shows dust and stains from boots and gear within a few days, and the hand-wash-only care instruction makes cleaning a hassle.
My fix: I use a mattress protector underneath a fitted sheet to keep the cover clean and avoid frequent hand washing. This adds a layer of comfort too.
Single Layer Foam Compresses Over Time
The problem: After a few weeks of use, I noticed the 5.5-inch thickness could compress more in the middle for heavier sleepers, reducing support.
My fix: Rotate the mattress head-to-foot every month and flip it over regularly since both sides are quilted. This helps the foam wear evenly and keeps it supportive longer.
Warranty & Support
Mytee Products provides warranty information directly on their Amazon listing, though I could not find a specific length stated in the product data. If you run into defects or issues, I recommend contacting Mytee through their Amazon seller page for the fastest response.
- Width: 30" | Length: 78" | Thickness: 5.5"
- Color: Gray | Material: Polyurethane Foam | Pinstripe Cover
- FMVSS302 Grade Cover | Double Sided Quilted Cover
Frequently Asked Questions
Will this 30×78 mattress fit my specific RV or truck sleeper?
You absolutely need to measure your bed space before ordering, because this mattress is cut to a very specific 30 inches wide by 78 inches long. I measured my truck sleeper at the narrowest point to make sure it would fit without bunching up. If your space is even a couple inches off, this mattress will not work well for you.
Is this mattress firm or soft for a side sleeper?
I found the medium firmness to be on the firmer side, especially during the first few nights. As a back sleeper, I was comfortable, but I think side sleepers will want more pressure relief for their hips and shoulders. The single layer of polyurethane foam just does not have the plush comfort layer that heavier side sleepers need.
Can I remove and wash the cover on this mattress?
Unfortunately, the care instructions clearly say hand wash only, and the cover is not removable from the foam core. I tried spot cleaning a small stain with mild soap and water, which worked okay, but I recommend using a mattress protector underneath a fitted sheet. This keeps the cover clean without the hassle of hand washing the whole mattress.
How much does this mattress weigh, and is it easy to move?
At just 13.6 pounds, this is one of the lightest RV mattresses I have handled, and I could easily lift it out of my camper to clean underneath. There are no built-in handles, but the weight is low enough that I did not miss them. This makes it a great option if you need to frequently access storage under your bed.
Is this mattress made in the USA, and what safety certifications does it have?
Yes, Mytee Products manufactures this mattress in the USA, which I appreciate for quality control. The cover is also FMVSS302 grade, meaning it meets federal fire safety standards for vehicles. I found this a reassuring feature for sleeping in a truck or RV where safety matters.
How does the 5.5-inch thickness compare to a standard home mattress?
Most home mattresses are 8 to 12 inches thick, so this 5.5-inch version is noticeably thinner and firmer by comparison. I found it works great in a low-roof sleeper cab where every inch of headroom counts, but do not expect the plush, sinking-in feel of a home bed. It is designed for utility and space efficiency, not luxury.
My Final Verdict
The Mytee Products 5.5 Inch Mattress is a solid, no-frills replacement for anyone needing a 30×78 inch bed in a truck or RV. I found the medium firmness and 13.6-pound weight practical for daily use, and the FMVSS302 grade cover adds real safety value. I would recommend it to back sleepers who want a simple upgrade, but not to side sleepers who need plush pressure relief.
The single layer of foam is the biggest trade-off here, but for the price and the fact it is made in the USA, I still think it is a fair buy for truckers on a budget. If you measure your space first and use a mattress protector, this bed will serve you well for years on the road.
Ready to Check the Price?
If you need a lightweight, USA-made mattress for your truck or camper, this 5.5-inch option is worth a serious look.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.